全球主机交流论坛

标题: 有谁知道搬瓦工最便宜的那款VPS可以扶墙吗 [打印本页]

作者: superneed    时间: 2014-1-29 16:13
标题: 有谁知道搬瓦工最便宜的那款VPS可以扶墙吗
本帖最后由 superneed 于 2014-1-29 17:33 编辑

搬瓦工的那个小丁丁可以扶墙吗?我看到有OPEN扶墙,不知道能不能架设。
新人求教安装好后怎么设置扶墙?
作者: tianyime    时间: 2014-1-29 16:38
我买的6刀的。。。自带的open不靠谱,自己装了个pptp,速度还可以。
作者: superneed    时间: 2014-1-29 16:58
tianyime 发表于 2014-1-29 16:38
我买的6刀的。。。自带的open不靠谱,自己装了个pptp,速度还可以。

PPTP不容易掉线的么?大侠有没有具体教程呢?
作者: enta    时间: 2014-1-29 17:01
http://bbs.73yi.net/thread-1365-1-1.html
作者: tianyime    时间: 2014-1-29 17:08
superneed 发表于 2014-1-29 16:58
PPTP不容易掉线的么?大侠有没有具体教程呢?

谷歌随便搜的。。。
作者: zhukai1010    时间: 2014-1-29 17:12
买了俩3.99和5.99的,后台可以自动装open,能用,但不是很靠谱,支持pptp
线路稳定的话扶墙速度很快
作者: superneed    时间: 2014-1-29 17:12
tianyime 发表于 2014-1-29 17:08
谷歌随便搜的。。。

我用myentunnel +ssh+firefox 试了,连不上,连上秒断

[17:14:29 01/29] plink.exe: Sent password
[17:14:29 01/29] 链接成功
[17:14:31 01/29] plink.exe: Access denied
[17:14:31 01/29] plink.exe: Access denied
[17:14:31 01/29] plink.exe: root@192.243.116.220's password:
[17:14:31 01/29] 正在发送口令
[17:14:31 01/29] plink.exe: Sent password
[17:14:33 01/29] plink.exe: Access denied
[17:14:33 01/29] plink.exe: Access denied
[17:14:33 01/29] plink.exe: root@192.243.116.220's password:
[17:14:33 01/29] 正在发送口令
[17:14:33 01/29] plink.exe: Sent password
[17:14:36 01/29] plink.exe: Received disconnect message (protocol error)
[17:14:36 01/29] plink.exe: Disconnection message text: Too many authentication failures for root
[17:14:36 01/29] plink.exe: Server sent disconnect message
[17:14:36 01/29] plink.exe: type 2 (protocol error):
[17:14:36 01/29] plink.exe: "Too many authentication failures for root"
[17:14:36 01/29] plink.exe: FATAL ERROR: Server sent disconnect message
[17:14:36 01/29] plink.exe: type 2 (protocol error):
[17:14:36 01/29] plink.exe: "Too many authentication failures for root"
[17:14:36 01/29] 已断开
[17:14:36 01/29] 离重试还有 5 秒(s)
[17:14:41 01/29] 正在读取可执行文件
作者: superneed    时间: 2014-1-29 17:19
原来是我密码输错了,已搞定,谢谢各位!
作者: babytomas    时间: 2014-1-29 18:15
tianyime 发表于 2014-1-29 16:38
我买的6刀的。。。自带的open不靠谱,自己装了个pptp,速度还可以。

你 debian 还是 centos 的?求个教程
作者: tianyime    时间: 2014-1-29 20:17
babytomas 发表于 2014-1-29 18:15
你 debian 还是 centos 的?求个教程

http://www.laozuo.org/1003.html 我用的这个一键安装 然后按照http://rashost.com/blog/centos5-pptpd-扶墙 设置了下自启,centos 5的
作者: babytomas    时间: 2014-1-30 01:22
tianyime 发表于 2014-1-29 20:17
http://www.laozuo.org/1003.html 我用的这个一键安装 然后按照http://rashost.com/blog/centos5-pptpd- ...

感谢,我这就去试试~~
作者: babytomas    时间: 2014-1-30 01:54
tianyime 发表于 2014-1-29 20:17
http://www.laozuo.org/1003.html 我用的这个一键安装 然后按照http://rashost.com/blog/centos5-pptpd- ...

,我安装 CentOS 5 32bit 试了两次失败然后用 CentOS 6 32bit 也失败 。。然后换成 5 64bit 的连上了无法上网 。。
作者: babytomas    时间: 2014-1-30 02:49
tianyime 发表于 2014-1-29 20:17
http://www.laozuo.org/1003.html 我用的这个一键安装 然后按照http://rashost.com/blog/centos5-pptpd- ...

感谢,最后 yum 安装的成功上网了~
作者: tianyime    时间: 2014-1-30 11:03
babytomas 发表于 2014-1-30 02:49
感谢,最后 yum 安装的成功上网了~

额,成功就好。。。
作者: 回味依旧    时间: 2014-1-30 11:09
GAE
作者: superneed    时间: 2014-1-30 12:08
babytomas 发表于 2014-1-30 02:49
感谢,最后 yum 安装的成功上网了~

好麻烦啊,我直接用的 MyEntunnel ,感觉效果还不错
作者: babytomas    时间: 2014-1-30 13:09
superneed 发表于 2014-1-30 12:08
好麻烦啊,我直接用的 MyEntunnel ,感觉效果还不错

其实也不是很麻烦,就几句命令就搞定了,只是有的错误找不到文档有点蛋疼。

用 pptp 主要是我的设备都不需要客户端就直接可以用
作者: superneed    时间: 2014-1-30 18:40
babytomas 发表于 2014-1-30 13:09
其实也不是很麻烦,就几句命令就搞定了,只是有的错误找不到文档有点蛋疼。

用 pptp 主要是我的设备都不 ...

手机也可以用吗?
作者: babytomas    时间: 2014-1-30 21:43
superneed 发表于 2014-1-30 18:40
手机也可以用吗?

正常使用中




欢迎光临 全球主机交流论坛 (https://0hostloc.overbye.eu.org/) Powered by Discuz! X3.4